Track Mounted Portable 5-Line Hose Reel
LMK 5-Line Hose Reel, robotic controls, 500’ of 5-line bonded hose (4-hydraulic and 1-pneumatic) with an internal 5-Line rotary fluid passage, hydraulic auto level-rewind and accessories are mounted on a hydraulic track system
- 8-HP gasoline powered hydraulic power pack with variable flow controls
- A 2,000 watt powered generator
- Fully functional directional traffic warning light and mounted flood lights.
- 110-volt air compressor
- Enclosed day light color monitor
- Manual rewind reel/500′ coax
- Main Pipe Size Positioning Device with wheel adapters for 8″, 10″, and 12″ size pipelines
- 8″, 10″, and 12″ Main Pipe Size Positioning Locking Elements (Packer Cans and Bladders)
- 5-line top roller/ pneumatic 5-line bottom roller
- Self retracting air hose reel 1/4″ x 25′
- Fire extinguisher
- First Aid Kit, Eye Wash Bottle, Umbrella
Steam Equipment – Mobile Steam Unit (Container on Trailer)
The LMK Mobile Steam Unit can be placed where you need it while not tying up a vehicle. The corrugated steel shipping container makes the ideal housing and contains everything needed to steam cure LMK’s T-Liner® Main-to-Lateral Connection Liners. Steam unit includes all piping, electrical and equipment listed below mounted and completely ready for field use.
- Down Stream Reel 500′ of sleeved 1″ and ½” steam hose reel with rotary fluid passage, pneumatic auto level-rewind, and direct chain drive.
- 20-HP diesel fired steam boiler
- 12-KW Whisper-Watt diesel powered generator
- 250 CFM BOSS diesel powered screw air compressor
- Electric air cooling system
- Enclosed water resistant daylight viewable color monitor
- Manual rewind reel/500′ coax
- 400 gallon poly water tank
- Top roller/ Pneumatic bottom roller
- Self retracting air hose reel 1/4″ x 25′
- Manual Rewind Single Inversion Rope Reel with 600′ of 5/16″ Inversion Rope
- Electric 3,500 psi pressure washer hose and reel
- 12 (qty) 24″ reflective traffic cones
- Fire extinguisher
- First Aid Kit
- Eye wash bottle
LMK CIPP T-Liner Wet Out Trailer – 28 ft.
Tailer is complete with a 48″ side door, full ramp rear door, and 7,000 lb axles. Trailer is wired with 50 AMP breaker box, (5) fluorescent ceiling lights, 7′ 6″ ceiling and 3-way switches. Powered by an 7-KW super quiet external fill gasoline fired generator. (Generator is mounted inside the trailer in protective box)
- Wet Out Starter Kit: Digital Thermometer Gun, Grommet Gun, Grommets, Quick Bands, Liner Wet Out Clamp, 2-Slug Rollers 1 with and 1 without Calibration Rings, digital pound scale and digital gram scale and T-Launcher stand
- Tool Box (mounted) with Universal Tool Kit
- Hard wired vacuum pump 1.1 CFM @ 25″ of mercury (mounted on shelf)
- Interior receptacles (Qty. 7)
- Fold down aluminum wet out tables
- Mixing drill, mixing paddle and holder with resin catch, digital scales for 5-Gallon Pails, Promoter and Catalyst
- Deep freezer (25 cubic feet)
- (2) Roof top air conditioners and heat strips (15 amp per unit)
- PVC walls/ceiling, Insulated walls, ceiling, floor, grey rubber floor covering
- LMK EZ Jack
- LMK Ramp Door Bridge
- Flush mount floor tie downs (Qty. 10)
- Matching spare tire (mounted)
- Fire extinguisher, first aid kit, PPE kit and eye wash station
- Storage shelf, marker board, markers and miscellaneous holders installed
Layflat Hose Assembly

- (2) 10′ Layflat Assembly for up to 5′ Liners
- (2) 25′ Layflat Assembly for up to 20′ Liners
- (2) 35′ Layflat Assembly for up to 30′
Cleanout Equipment

- Push Plug, Cleanout, downstream, Steam “B” Station, with ½ inch flow thru, for 4″ – 6″ diameter pipes, hose and regulator assembly
- Push Plug, Cleanout, upstream, non-flow thru, 3″ – 6″, with hose and regulator assembly
T-Launcher for use with 5-Line Equipment

- (2) 8 inch Non-Flow Thru T-Launcher with 5-Line Positioner Tab, includes male camlock and 18″ layflat hose assembly.
- (2) 10 inch Flow Thru T-Launcher with 5-Line Positioner Tab, includes male camlock and 18″ layflat hose assembly.
- (2) 12 inch Flow Thru T-Launcher with 5-Line Positioner Tab, includes male camlock and 18″ layflat hose assembly.
Training
- License Fee per Territory (State), T-Liner
- (4) Days Training, Charge per Day, T-Liner, In-House at LMK’s Facility. Minimum 4 training days required. Trainees: Minimum 4, Maximum 8. LMK will provide all necessary training materials. Continental breakfast and lunch will also be provided. 2 Trainers
- (4) Days Training, Charge per Day, T-Liner, at Customer Location/Jobsite. Minimum 4 training days required. Trainees: minimum 4, maximum 8. Field Training must be scheduled to occur within 60 days from In-House Training. 2 Trainers
- Travel Expenses for Two LMK Technicians/Trainers – Airfare (Economy or Coach) and/or Rental Car – will be added to order when travel is completed
- (2) Travel Mobilization Time / per Trainer – Within Continental US