Air Compressor 70 CFM

Portable Boss Bullett II Rotary Screw Air Compressor, 70 cfm rated delivery, 20hp Honda 4-cycle engine, 100 psig operating pressure rating, single stage oil flooded rotary screw, 80-115 psig operating pressure range, oil to air cooling system, 43″L x 31″ W x 35″ H. Weight 410 lbs. Equipped with 2 – 25 ft. 3/4″ air hoses
Portable Ambient Air Reel System

- Hose Reel with Rotary Fluid Passage with high torque gear reduction pneumatic auto level wind. Fixed with 500′ of high tensile 1/2″ x 1/2″ Dual Bonded Hose, all mounted on a pneumatic heavy duty cart.
- Mounted TV Monitor
- Portable 2000 watt Honda Generator
- Coax Cable Reel
- First Aid Kit/Fire Extinguisher/Eye Wash Kit mounted on the cart
- Bottom Roller and Adjustable Top Roller
Winch Assembly

Electric, 115V with Remote Controller and 1000′ of 3/16 SST Cable
Rotational Device with Standalone Rewind Reel (Powered by Portable Generator)

For positioning and rotating launcher/hose assembly to align with lateral opening. Use with Ambient Air Reel. Includes locking elements with cans and bladders for 8″, 10″ and 12″ diameter.
Layflat Hose Assembly

- 10′ Layflat Assembly for up to 5′ Liners
- 25′ Layflat Assembly for up to 20′ Liners
T-Launcher for use with 5-Line Equipment

- 8 inch Non-Flow Thru T-Launcher with 5-Line Positioner Tab, includes male camlock and 18″ layflat hose assembly
- 10 inch Flow Thru T-Launcher with 5-Line Positioner Tab, includes male camlock and 18″ layflat hose assembly
- 12 inch Flow Thru T-Launcher with 5-Line Positioner Tab, includes male camlock and 18″ layflat hose assembly
Layflat Hose Assembly Parts
- Inversion Rope, 5/16″, Kevlar, Non-stretch, Single Braid White (To create a launcher set up order length of layflat hose x 2.5 plus 5 ft.- sold in 600′ sections)
- Clamps – 2 per end needed
LMK CIPP T-Liner Wet Out Trailer – 28 ft.
Trailer is complete with a 48″ side door, full ramp rear door, and 7,000 lb. axles. Trailer is wired with 50 AMP breaker box, (5) fluorescent ceiling lights, 7′ 6″ ceiling and 3-way switches. Powered by an 7-KW super quiet external fill gasoline fired generator. (Generator is mounted inside the trailer in protective box)
- Wet Out Starter Kit: Digital Thermometer Gun, Grommet Gun, Grommets, Quick Bands, Liner Wet Out Clamp, 2-Slug Rollers 1 with and 1 without Calibration Rings, digital pound scale, digital gram scale and T-Launcher stand.
- Tool Box (mounted) with Universal Tool Kit
- Hard wired vacuum pump 1.1 CFM @ 25″ of mercury (mounted on shelf)
- Interior receptacles (Qty. 6)
- Fold down aluminum wet out tables
- Deep freezer (25 cubic feet)
- Mixing drill, mixing paddle and holder with resin catch, digital scales for 5-Gallon Pails, Promoter and Catalyst
- Storage shelf, marker board, markers and miscellaneous holders installed
Cleanout Equipment

- Push Plug, Cleanout, downstream, Steam “B” Station, with ½ inch flow thru, for 4″ – 6″ diameter pipes, hose and regulator assembly
- Push Plug, Cleanout, upstream, non-flow thru, 3″ – 6″, with hose and regulator assembly
Training
- License Fee per Territory (State), T-Liner
- Training, Charge per Day, T-Liner, In-House at LMK’s Facility. Minimum 4 training days required. Trainees: Minimum 4, Maximum 8. LMK will provide all necessary training materials. Continental breakfast and lunch will also be provided. 2 Trainers
- Training, Charge per Day, T-Liner, at Customer Location/Jobsite. Minimum 4 training days required. Trainees: minimum 4, maximum 8. Field Training must be scheduled to occur within 60 days from In-House Training. 2 Trainers
- Travel Expenses for LMK Technicians/Trainers – Airfare (Economy or Coach) and/or Rental Car – will be added to order when travel is completed
- (2) Travel Mobilization Time / per Trainer – Within Continental US