Air Compressor 70 CFM
Portable Boss Bullet II Rotary Screw Air Compressor, 70 cfm rated delivery, 20hp Honda 4-cycle engine, 100 psig operating pressure rating, single stage oil flooded rotary screw, 80-115 psig operating pressure range, oil to air cooling system. 43″L X 31″W X 35″H Weight 410 lbs. Equipped with 2 – 25 ft. 3/4″ air hoses.
Portable Ambient Air Reel System
Hose Reel with Rotary Fluid Passage, with high torque gear reduction pneumatic auto level wind. Fixed with 500’ of high-tensile 1/2″x1/2″ Dual Bonded Hose, all mounted on a pneumatic heavy duty cart.
- Mounted TV Monitor
- Portable 2000 watt Honda Generator
- Coax Cable Reel
- First Aid Kit/Fire Extinguisher/Eye Wash Kit mounted on the cart
- Bottom Roller and Adjustable Top Roller
Single Inversion Standard Rope Reel
Single Inversion Standard Rope Reel
Shorty T-Liner Layflat Launcher System for Use with Schwalm Robot
- (2) 8 inch Shorty Layflat Launcher System (includes Schwalm Puck Set, Flow Thru T-Launcher 3.0, Camlocks and Layflat Hose, End Cone and Non-Stretch Kevlar Rope)
- (2) 10 inch Shorty Layflat Launcher System (includes Schwalm Puck Set, Flow Thru T-Launcher 3.0, Camlocks and Layflat Hose, End Cone and Non-Stretch Kevlar Rope)
- (2) 12 inch Shorty Layflat Launcher System (includes Schwalm Puck Set, Flow Thru T-Launcher 3.0, Camlocks and Layflat Hose, End Cone and Non-Stretch Kevlar Rope)
LMK CIPP T-Liner Wet Out Trailer – 28 ft.
- Wet Out Starter Kit: Digital Thermometer Gun, Grommet Gun, Grommets, Quick Bands, Liner Wet Out Clamp, 2-Slug Rollers 1 with and 1 without Calibration Rings, digital pound scale and digital gram scale and T-Launcher stand
- Tool Box (mounted) with Universal Tool Kit
- Hard wired vacuum pump 1.1 CFM @ 25″ of mercury (mounted on shelf)
- Interior receptacles (Qty. 7)
- Fold down aluminum wet out tables
- Deep freezer (25 cubic feet)
- Mixing drill, mixing paddle and holder with resin catch, digital scales for 5-Gallon Pails, Promoter and Catalyst
- (2) Roof top air conditioners and heat strips (15 amp per unit)
- PVC walls/ceiling, Insulated walls, ceiling, floor, grey rubber floor covering
- LMK EZ Jack
- LMK Ramp Door Bridge
- Flush mount floor tie downs (Qty. 10)
- Matching spare tire (mounted)
- Fire extinguisher, first aid kit, PPE kit and eye wash station
- Storage shelf, marker board, markers and miscellaneous holders installed
Schwalm Robotics and Accessories
Schwalm Robot – Focus Camera
- The robot will be supplied standard with the following items:
- Air motor type 2025-P Serial-Nr.
- Air motor type 2560-P Serial-Nr.
- Side weights, Digital Box, four sets of axle extension sets 12″-24″
- Lifting hook, hydraulic oil, hydraulic oil including a filling device; several tools; operator’s manual and transportation box
- Main Cable Repair Kit
- A high-resolution, tilt, focus camera with integrated LED lighting
19″ Video System
- Digital Control Unit 19″ Video System (To build into vehicle)
- Text generator and an electronical meter counter on screen (Includes OSD Card)
- Has a proportional speed control. Power supply 120 V/60Hz and capacity approx. 1000 Watts. Weight 29 Kg.
- Vehicle mounted remote control unit for control of forward/backwards movement of the robot.
Electrical cable drum RA200
- Aluminum frame, emergency switch, digital footage counter on the front
- Adjustable pulling strength of the cable, adjustable speed, automatic or manual control.
- Includes a mounting bracket for the drum.
- Power supply 115V 60 Hz or 220 Volts 50Hz.
- Dimensions: Length 536mm; Width 350mm; Height 560mm. Weight 28kg
- 660 Foot cable
Twin Hose Drum Reel
- Top feed 500 feet of air and water hose. Includes camera cleaning unit.
- (4) Carbide wheels Large Robot
(2) Piranha Milling Heads
- Cone shaped special mill for cutting all kinds of materials except steel.
- Diameter 2.75 inches, Height 3 inches, Number of segments 30
(2) Mushroom Shaped Milling Heads
- Suitable for cutting all kinds of materials
- Diameter 3.8 inches, small version with diamonds. Number of segments 12
(2) Wire Brush Heads
- Small Cup Form- 2.5″
- Air Motor Extension (4-inch) for 2560P Air Motor
- Air Motor Extension (6-inch) for 2560P Air Motor
- (2) Hydraulic Hose Short
- (3) Bearings 618/8
- (2) Bearings 61803 2Z
- (1) Seal 17-26-6 BA
- (2) Seals 45-58-7 BABSL
- (4) Seals 30-47-7 BABSL
- (1) Camera Cleaning Unit on Robot
- (1) Air Hose for Cutting Motor
- (1) Digital Motor for Tool Movement
- (1) Digital Motor for Hydraulic and Arm Rotation
- Wings for Air Mortor 2025 1000 W
- V-Belt for 2060
- Test Box for 1330/2060 Robot
- License Fee per Territory (State), T-Liner
- (4) Training, Charge per Day, T-Liner, In-House at LMK’s Facility. Minimum 4 training days required. Trainees: Minimum 4, Maximum 8. LMK will provide all necessary training materials. Continental breakfast and lunch will also be provided. 2 Trainers
- (4) Training, Charge per Day, T-Liner, at Customer Location/Jobsite. Minimum 4 training days required. Trainees: minimum 4, maximum 8. Field Training must be scheduled to occur within 60 days from In-House Training. 2 Trainers
- (2) Travel Expenses for LMK Technicians/Trainers – Airfare (Economy or Coach) and/or Rental Car – will be added to order when travel is completed
- (2) Travel Mobilization Time / per Trainer – Within Continental US