Shorty Schwalm System - Steam Cure

Call For Quote

The ASTM F2561 Compliant Shorty™ Liner system extends up the lateral pipe and provides a full-circle; one-piece structural connection with ASTM F3240 Compliant Insignia® hydrophilic compression gasket sealing. Recommended length of lateral is 5 feet maximum.

Shorty Steam System

LMK CIPP T-Liner Wet Out Trailer – 28 ft.

Trailer is complete with a 48″ side door, full ramp rear door, and 7,000 lb. axles. Trailer is wired with 50 AMP breaker box, (5) fluorescent ceiling lights, 7′ 6″ ceiling and 3-way switches. Powered by an 7-KW super quiet external fill gasoline fired generator. (Generator is mounted inside the trailer in protective box)

  • Wet Out Starter Kit: Digital Thermometer Gun, Grommet Gun, Grommets, Quick Bands, Liner Wet Out Clamp, 2-Slug Rollers 1 with and 1 without Calibration Rings, digital pound scale and digital gram scale and T-Launcher stand
  • Tool Box (mounted) with Universal Tool Kit
  • Hard wired vacuum pump 1.1 CFM @ 25″ of mercury (mounted on shelf)
  • Interior receptacles (Qty. 7)
  • Fold down aluminum wet out tables
  • Deep freezer (25 cubic feet)
  • Mixing drill, mixing paddle and holder with resin catch, digital scales for 5-Gallon Pails, Promoter and Catalyst
  • (2) Roof top air conditioners and heat strips (15 amp per unit)
  • PVC walls/ceiling, Insulated walls, ceiling, floor, grey rubber floor covering
  • LMK EZ Jack
  • LMK Ramp Door Bridge
  • Flush mount floor tie downs (Qty. 10)
  • Matching spare tire (mounted)
  • Fire extinguisher, first aid kit, PPE kit and eye wash station
  • Storage shelf, marker board, markers and miscellaneous holders installed

Steam Equipment – Mobile Steam Unit (Container on Trailer)

The LMK Mobile Steam Unit can be placed where you need it while not tying up a vehicle. The corrugated steel shipping container makes the ideal housing and contains everything needed to steam cure LMK’s T-Liner® Main-to-Lateral Connection Liners.

Steam unit includes all piping, electrical and equipment listed below mounted and completely ready for field use.

  • Down Stream Reel 500′ of sleeved 1″ and ½” steam hose reel with rotary fluid passage, pneumatic auto level-rewind, and direct chain drive.
  • 20-HP diesel fired steam boiler
  • 12-KW Whisper-Watt diesel powered generator
  • 250 CFM BOSS diesel powered screw air compressor
  • Electric air cooling system
  • Enclosed water resistant daylight viewable color monitor
  • Manual rewind reel/500′ coax
  • 400 gallon poly water tank
  • Top roller/ Pneumatic bottom roller
  • Self retracting air hose reel 1/4″ x 25′
  • Manual Rewind Single Inversion Rope Reel with 600′ of 5/16″ Inversion Rope
  • Electric 3,500 psi pressure washer hose and reel
  • 12 (Qty) 24″ reflective traffic cones
  • Fire extinguisher
  • First Aid Kit
  • Eye wash bottle

Winch Assembly

Winch Assembly, Electric, 115V with Remote Controller and 1000′ of 3/16″ SST Cable

Single Inversion Standard Rope Reel

Single Inversion Standard Rope Reel

Layflat Hose Assembly

  • (2) 10′ Layflat Assembly for up to 5′ Liners
  • (2) 25′ Layflat Assembly for up to 20′ Liners
  • (2) 35′ Layflat Assembly for up to 30′ Liners

Steam Back Layflat Launcher

  • Steam Back Layflat Launcher System for up to 5′ Liner Lengths. Includes Steam Back End Cone, Hose Barb, Hose and Cable, 4″ Layflat Hose, Female Camlock and D-Ring
  • Steam Back Layflat Launcher System for up to 15′ Liner Lengths. Includes Steam Back End Cone, Hose Barb, Hose and Cable, 4″ Layflat Hose, Female Camlock and D-Ring

T-Launcher for use with 5-Line Equipment

  • (2) 8 inch Non-Flow Thru T-Launcher with 5-Line Positioner Tab, includes male camlock and 18″ layflat hose assembly
  • (2) 10 inch Non-Flow Thru T-Launcher with 5-Line Positioner Tab, includes male camlock and 18″ layflat hose assembly

Cleanout Equipment

  • Push Plug, Cleanout, downstream, Steam “B” Station, with ½ inch flow-thru, for 4″ – 6″ diameter pipes, hose and regulator assembly
  • Push Plug, Cleanout, upstream, non-flow thru, 3″ – 6″, with hose and regulator assembly

Schwalm Robotics and Accessories

  • Schwalm Robot – Focus Camera

    • The robot will be supplied standard with the following items:
    • Air motor type 2025-P Serial-Nr.
    • Air motor type 2560-P Serial-Nr.
    • Side weights, Digital Box, four sets of axle extension sets 12″-24″
    • Lifting hook, hydraulic oil, hydraulic oil including a filling device; several tools; operator’s manual and transportation box
    • Main Cable Repair Kit
    • A high-resolution, tilt, focus camera with integrated LED lighting
  • Digital Control Unit 19″ Video System (To build into vehicle)

    • Text generator and an electronical meter counter on screen (INCLUDES OSD Card)
    • The unit controls all six functions of the robot.
    • Has a proportional speed control. Power supply 120 V/60Hz and capacity approx. 1000 Watts. Weight 29 Kg.
  • Vehicle mounted remote control unit for control of forward/backwards movement of the robot.
  • Electrical cable drum RA200

    • Aluminum frame, emergency switch, digital footage counter on the front
    • Adjustable pulling strength of the cable, adjustable speed, automatic or manual control.
    • Includes a mounting bracket for the drum
    • Power supply 115V 60 Hz or 220 Volts 50Hz
    • Dimensions: Length 536mm; Width 350mm; Height 560mm. Weight 28kg
    • 660 Foot cable
  • Twin Hose Drum Reel

    • Top feed 500 feet of air and water hose. Includes camera cleaning unit.
  • (4) Carbide wheels Large Robot
  • (2) Piranha Milling Heads

    • Cone shaped special mill for cutting all kinds of materials except steel
    • Diameter 2.75 inches, Height 3 inches, Number of segments 30
  • (2) Mushroom Shaped Milling Heads ($455.00 Each)

    • Suitable for cutting all kinds of materials
    • Diameter 3.8 inches, small version with diamonds. Number of segments 12
  • (2) Wire Brush Heads

    • Small Cup Form- 2.5″
  • Air Motor Extension (4-inch) for 2560P Air Motor
  • Air Motor Extension (6-inch) for 2560P Air Motor
  • (2) Hydraulic Hose Short
  • (3) Bearings 618/8
  • (2) Bearings 61803 2Z
  • (1) Seal 17-26-6 BA
  • (2) Seal 45-58-7 BABSL
  • (4) Seal 30-47-7 BABSL
  • (1) Camera Cleaning Unit on Robot
  • (1) Air Hose for Cutting Motor
  • (1) Digital Motor for Tool Movement
  • (1) Digital Motor for Hydraulic and Arm Rotation
  • (1) Wings for Air Mortor 2025 1000 W
  • (1) V-Belt for 2060
  • (1) Test Box for 1330/2060 Robot
  • Optional/Replacement Parts

    • (2) Schwalm Puck Positioner for 8″ T-Launcher with Standard Puck and Extended Puck and Laser Holder
    • (2) Schwalm Puck Positioner for 10″ T-Launcher with Standard Puck and Extended Puck and Laser Holder
    • (2) Schwalm Puck Positioner for 12″ T-Launcher with Standard Puck and Extended Puck and Laser Holder
    • (2) Heavy Duty Laser Pointer (typically lasts for over 20 uses)

Training

  • License Fee per Territory (State), T-Liner
  • (4) Training, Charge per Day, T-Liner, In-House at LMK’s Facility. Minimum 4 training days required. Trainees: Minimum 4, Maximum 8. LMK will provide all necessary training materials. Continental breakfast and lunch will also be provided. 2 Trainers
  • (4) Training, Charge per Day, T-Liner, at Customer Location/Jobsite. Minimum 4 training days required. Trainees: minimum 4, maximum 8. Field Training must be scheduled to occur within 60 days from In-House Training. 2 Trainers
  • (1) Travel Expenses for LMK Technicians/Trainers – Airfare (Economy or Coach) and/or Rental Car – will be added to order when travel is completed
  • (2) Travel Mobilization Time / per Trainer -Within the Continental US

Want to get started?

  • This field is for validation purposes and should be left unchanged.